JCJZ 六色機組式高速高清柔版印刷機 科賽套色系統 日本三菱控制

設計來源：根據意大利客戶提供的視頻圖片及要求，吸收柔版印刷機的元素，共同開發的一款組合式柔版印刷機。

Design source: based on the video images and requirements provided by Italian customers, it absorbs the elements of flexographic printing presses, and jointly develops a satellite composite flexographic printing press

特點Features：

1.從放料到收料超短距離。

From the discharge to receiving a very short distance

2.自主研發的特制刮刀，彌補高速飛墨，減少了溶劑在空氣中的揮發。

      Self-developed special scraper to make up for high-speed flying ink, reducing the solvent in the air of volatile.

3.反復印刷長度260-635MM，填補層疊式柔版印刷機印刷長度不夠的空白。

   Repeated printing length 203-635MM, to fill the laminated flexo printing machine printing length is not enough blank.

4.采用衛星式輪轉機套色方式，套色精準，印刷穩定。

Using satellite rotary machine sets color, color chromatography precision, printing stability.

5.承印材料：PVC：35~70μm OPP：20~70μm BOPP：20~60μm PE：35~100μm NY：20~50μm PET：20~60μm CPP：20~60μm紙張：20~250g/㎡不干膠等材料。

Printing material: PVC: 35 to 70 μm OPP: 20 to 70 μm BOPP: 20 to 60 μm PE: 35 to 100 μm NY: 20 to 50 μm PET: 20 to 60 μm CPP: 20 to 60 μm Paper: 20 to 250 g / Other materials.

5. 制版周期短、成本低制一副多色凹版滾筒的周期為5?10天，而柔印版制作為5小時。柔性版視印刷面積而定版材大小，比凹印滾筒成本低得多。

The period of plate making is short, the cost is low, the period of multi-color gravure cylinder is 5-10 days, but the flexography is 5 hours. The flexography depends on the printing area and the size of the plate, which is much lower than the cost of gravure drum.

6. 印前預熱，印后風刀干燥設計。解決衛星式印刷機各印刷單元之間距離太短，油墨干燥不良時容易造成的蹭臟。

Pre-pre-press, printed after the wind knife drying design. Solve the satellite printing press between the printing unit is too short, easy to cause dirty ink dirty.

8.1-6色可根據需要定制，寬度300-1600根據需要定制。

1-6 color can be customized according to need, width 300-1600 customized according to need

9.工藝1放料、2自動恒張力、3刮刀、4印刷單元、5牽引、6自動恒張力、7收料

Sections:1 discharge, 2 automatic constant tension, 3  scraper, 4 printing unit, 5 traction, 6 automatic constant tension, 7 receipts

主要技術參數Main Technical Variables：

電器清單